EPtronics 1040mA 25W 8-24VDC Constant Current Driver with Dimming

LD25W-24-C1040

The EPTronics LD-25W-24-C1040 is a 25 Watt electronic, constant current, remote driver available to power Hunza series version PureLED fixtures in the USA market.

Dimming Options:

Leading edge dimming, designed to be used with TRIAC dimmers (-LE Model)
Trailing edge dimming, designed to be used with ELV dimmers (-TE model)
Dim-to-off, 0-10V Dimming & Resistance (-RD Model).

For exterior use, it is highly recommended to install this in a weatherproof box, available as an option from Hunza.

The PC-17-02 weatherproof box is a requirement for UL compliance. When this driver is used as a remote power supply, series wiring is required to connect the fixtures. Please refer to the Hunza PureLED Series Wiring page for more information on wiring diagrams and fixture loads per driver.

SKU: LD25W-24-C1040 Categories: Hunza, Power Supplies Tag: Accessory

Product Specifications

Driver Type	Constant Current
Dimming	0-10V Dimming Leading Edge Trailing Edge
Input Voltage	90-305VAC
Frequency	47/63Hz
Input Current	0.25A
Power Factor	≥0.90C
Input Power (MAX)	25W
Inrush current	<15A
Output Voltage	8-24V
Output Current	1040mA
Output Power (W)	25W
Ambient/Operating Temperature (ta)	-30 …+60°C
Case Temperature (tc)	-30°C …+90°C
Ingress Protection	IP66
Standards	CE UL Recognised
Warranty	Third Party Warranty*
Standards	UL8750 EN61347 CSA 22.2 FCC 47CFR Part 15 Class B & EN55015 CE EN61000-4-5 EN61000-3-2 & EN61000-3-3 Class C RoHS
Additional Specs	Typical Efficiency: 86% Humidity (non-condensing): 5% – 95%RH Cooling: Convection Vibration Frequency: 5-55Hz/2g 30 minutes MTBF@ 40OC: 482,000 hours @ Full Load per MIL-217F Notice 2 Leakage current: 400uA typical; Hold up time: half cycle Protection: output over-voltage – output over-current – output short circuit -auto-recovery. Storage Temperature (Ts): -40°C …+85°C
Weight	0.198 kg ( 0.44 lb )

Downloads

Specifications / Data Sheets