Retro Wall Transformer
Power Supplies
CAT. NO /R
The Retro Wall Transformer 120/240 volt version is available for Hunza wall mounted fixtures, for example the Wall Spot, Down Lite, Pillar Lite, Pagoda Lite, Euro Wall Spots and Euro Pillar Lite.
With an electronic transformer built into the luminaire base, this option is designed for wall installations where mounting a remote transformer is not practical, e.g. in a brick wall where there is no space to recess the transformer or where an existing 120/240 volt light fitting needs to be replaced.
Retro luminaires are a very economical way to overcome potentially expensive installation problems.
With this option the base increases in depth to 48mm (1 7/8"). All USA Retro wall mount fixtures are supplied with a wide back plate, designed to suit a standard 3/0 or 4/0 junction box (this plate must be ordered separately for non-Retro fixtures - /WBAP).
The electronic transformer is 120 or 240 volt AC and is encapsulated in silicon. It is rated IP66 against water ingress, has a built-in safety shutdown system for overload and is dimmable with a leading edge dimmer. It will power either 1 x 10 watt, 1 x 20 watt, 2 x 20 watt, 1 x 35 watt, 2 x 35 watt or 1 x 50 watt lamps.
Specifications
Input Voltage
120V 60Hz or 240V 50Hz
Output Voltage
12VAC
Wattage
75 watts
Physical Properties
Ingress Protection
IP66
Standards
AS/NZ61046, EMC55015, EN61046, Z246
Warranty
5 years